D-Link xStack DES-3528 Series Cli Reference Manual page 510

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
Copyright(C) 2013 D-Link Corporation. All rights reserved.
DES-3528:admin#
DES-3528:admin#
DES-3528:admin# download configuration 10.41.44.44 c:\cfg\setting.txt
Command: download configuration 10.41.44.44 c:\cfg\setting.txt
Connecting to server................... Done.
Download configuration................. Done.
The very end of the autoconfig process including the logout appears like this:
DES-3528:admin# isable authen_policy
Command: disable authen_policy
Success.
DES-3528:admin#
DES-3528:admin# #------------------------------------------------------------
DES-3528:admin# #
Saving configurations and logs to NV-RAM...... Done.
**********
* Logout *
**********
NOTE: With autoconfig enabled, the Switch ipif settings now define the Switch as a DHCP client. Use
the show Switch command to display the new IP settings status.
disable autoconfig
Purpose This command is used to disable the auto-configuration function.
Syntax disable autoconfig
Description This command is used to disable autoconfig. This instructs the Switch not to accept
autoconfiguration instruction from the DHCP server. This does not change the IP settings of
the Switch. The ipif settings will continue as DHCP client until changed with the config ipif
command.
Parameters None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To disable autoconfig:
DES-3528:admin#
Command: disable autoconfig
Success.
DES-3528:admin#
DES-3528 Fast Ethernet Switch Command Line Interface
Firmware: Build 3.00.012
End of configuration file for DES-3528
disable autoconfig
510