D-Link xStack DES-3528 Series Cli Reference Manual page 221

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
show mld_snooping forwarding
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show all MLD snooping forwarding entries located on the Switch:
DES-3528:admin#
Command: show mld_snooping forwarding
VLAN Name : default
Source IP : 2001::1
Multicast Group: FE1E::1
Port Member : 2,7
VLAN Name : default
Source IP : 2001::2
Multicast Group: FF1E::1
Port Member : 5
Total Entries : 2
DES-3528:admin#
This command displays the Switch's current MLD snooping forwarding table.
show mld_snooping forwarding {[vlan <vlan_name 32> | vlanid <vlanid_list>]}
It provides an easy way for users to check the list of ports that the multicast group that
comes from specific sources will be forwarded to. The packet comes from the source VLAN.
They will be forwarded to the forwarding VLAN. The MLD snooping further restricts the
forwarding ports.
vlan - (Optional) Specify the name of the VLAN for which you want to view MLD snooping
forwarding table information.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid - (Optional) Specify the ID of the VLAN for which you want to view MLD snooping
forwarding table information.
<vlanid_list> - Enter the VLAN ID list here.
If no parameter is specified, the system will display all current MLD snooping forwarding
table entries of the Switch.
None.
show mld_snooping forwarding
221