D-Link xStack DES-3528 Series Cli Reference Manual page 72

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
show packet ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the packets analysis for port 2
DES-3528:admin# show packet port 2
Command: show packet port 2
Port Number : 2
===============================================================
Frame Size/Type
---------------
64
65-127
128-255
256-511
512-1023
1024-1518
Unicast RX
Multicast RX
Broadcast RX
Frame Type
---------------
RX Bytes
RX Frames
TX Bytes
TX Frames
CTRL+C ESC q Quit
show error ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the errors of the port 3:
DES-3528:admin# show error ports 3
Command: show error ports 3
Port Number : 3
CRC Error
Undersize
Used to display statistics about the packets sent and received by the Switch.
show packet ports <portlist>
This command is used to display statistics about packets sent and received by ports
specified in the <portlist>.
<portlist> − Specifies a port or range of ports to be displayed.
None.
Frame Counts
------------
0
0
0
0
0
0
0
0
0
Total
------------
0
0
0
0
SPACE n Next Page
Used to display the error statistics for a range of ports.
show error ports <portlist>
This command will display all of the packet error statistics collected and logged by the Switch
for a given port list.
<portlist> − Specifies a port or range of ports to be displayed.
None.
RX Frames
---------
0
0
Frames/sec
-----------
0
0
0
0
0
0
0
0
0
Total/sec
-----------
0
0
0
0
p Previous Page r
Excessive Deferral
CRC Error
72
Refresh
TX Frames
---------
0
0