D-Link xStack DES-3528 Series Cli Reference Manual page 189

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
config igmp_snooping multicast_vlan_group_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To add IGMP multicast address or range to a profile:
DES-3528:admin# config igmp_snooping multicast_vlan_group_profile g1 add 235.2.2.1-23
5.2.2.2
Command: config igmp_snooping multicast_vlan_group_profile g1 add 235.2.2.1-235.
2.2.2
Success.
DES-3528:admin#
delete igmp_snooping multicast_vlan_group_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the IGMP multicast VLAN group profile "g1":
DES-3528:admin# delete igmp_snooping multicast_vlan_group_profile g1
Command: delete igmp_snooping multicast_vlan_group_profile g1
Success.
DES-3528:admin#
Used to configure an IGMP snooping multicast group profile on the Switch, and to add or
delete multicast address for the profile.
config igmp_snooping multicast_vlan_group_profile <profile_name 1-32> [add |
delete] <mcast_address_list>
This command configures an IGMP multicast VLAN group profile on the Switch, and can add
or delete multicast addresses for the profile.
<profile_name 32> − Specifies the IGMP multicast VLAN group profile name, max length is
32.
[add | delete] – Add or delete IGMP multicast address list to or from this multicast VLAN
group profile
<mcast_address_list> – Specifies the IGMP multicast addresses to be configured. It can be a
continuous single multicast addresses, such as 225.1.1.1, 225.1.1.3, 225.1.1.8, or a
multicast address range, such as 225.1.1.1 - 225.2.2.2, or both of them, such as 225.1.1.1,
225.1.1.18 - 225.1.1.20.
Only Administrator and Operator and Power-User-level users can issue this command.
Used to delete an IGMP multicast VLAN group profile on the Switch.
delete igmp_snooping multicast_vlan_group_profile [profile_name <profile_name 1-
32> | all]
This command deletes an IGMP multicast VLAN group profile on the Switch.
<profile_name 32> − Specifies the IGMP multicast VLAN profile name, max length is 32.
all – All IGMP multicast VLAN group profile will be deleted.
Only Administrator and Operator and Power-User-level users can issue this command.
189