Multicast Vlan Commands - D-Link xStack DES-3528 Series Cli Reference Manual

Layer 2 managed stackable fast ethernet switch
Hide thumbs Also See for xStack DES-3528 Series:
Table of Contents

Advertisement

xStack® DES-3528/DES-3552 Series Layer 2 Fast Ethernet Managed Switch CLI Reference Guide
M
VLAN C
ULTICAST
The Multicast VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command
create igmp_snooping multicast_vlan
config igmp_snooping multicast_vlan
show igmp_snooping
multicast_vlan_group
delete igmp_snooping multicast_vlan
enable igmp_snooping multicast_vlan
disable igmp_snooping multicast_vlan
show igmp_snooping multicast_vlan
config igmp_snooping multicast_vlan
forward_unmatched
create igmp_snooping
multicast_vlan_group_profile
config igmp_snooping
multicast_vlan_group_profile
delete igmp_snooping
multicast_vlan_group_profile
show igmp_snooping
multicast_vlan_group_profile
config igmp_snooping
multicast_vlan_group
show igmp_snooping
multicast_vlan_group
create mld_snooping multicast_vlan
config mld_snooping multicast_vlan
create mld_snooping
multicast_vlan_group_profile
config mld_snooping
multicast_vlan_group_profile
delete mld_snooping
multicast_vlan_group_profile
show mld_snooping
multicast_vlan_group_profile
config mld_snooping
multicast_vlan_group
OMMANDS
Parameters
<vlan_name 32> <vlanid 2-4094> {remap_priority [<value 0-7> | none] {
replace_priority}}
<vlan_name 32> {[add | delete] [member_port <portlist> | [source_port
<portlist> | untag_source_port <portlist>] | tag_member_port <portlist>] |
state [enable | disable] | replace_source_ip <ipaddr> | remap_priority
[<value 0-7> | none] { replace_priority}}(1)
{< vlan_name 32> }
<vlan_name 32>
{<vlan_name 32>}
[disable | enable]
<profile_name 1-32>
<profile_name 1-32> [add | delete] <mcast_address_list>
[profile_name <profile_name 1-32> | all]
{<profile_name 1-32>}
<vlan_name 32> [add | delete] profile_name <profile_name 1-32>
{< vlan_name 32> }
config <vlan_name 32> <vlanid 2-4094> {remap_priority [<value 0-7> |
none] {replace_priority}}
<vlan_name 32> {[add | delete] [member_port <portlist> | [source_port
<portlist> | untag_source_port <portlist>] | tag_member_port <portlist>] |
state [enable | disable] | replace_source_ip <ipv6addr> | remap_priority
[<value 0-7> | none] { replace_priority}}(1)
<profile_name 1-32>
<profile_name 1-32> [add | delete] <mcastv6_address_list>
[profile_name <profile_name 1-32> | all]
{<profile_name 1-32>}
<vlan_name 32> [add | delete] profile_name <profile_name 1-32>
165

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents