D-Link xStack DES-3528 Series Cli Reference Manual page 518

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
config authentication server failover
Purpose
This command is used to configure authentication server failover function.
Syntax config authentication server failover [local | permit | block]
Description This command is used to configure authentication server failover function.
Parameters local - If RADIUS server can't reach, use local DB to authenticate the client.
permit - The client is always regarded as authenticated.
block - If can't pass authentication, then block the client. (Default setting).
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
Set authentication server auth fail over state:
DES-3528:admin#
Command: config authentication server failover local
Success.
DES-3528:admin#
show authentication
Purpose
This command is used to display authentication global configuration.
Syntax show authentication
Description This command is used to display authentication global configuration.
Parameters None.
Restrictions None.
Example usage:
To show authentication global configuration:
DES-3528:admin#
Command: show authentication
Authentication Server Failover: Block.
DES-3528:admin#
Command: show authentication
Authentication Server Failover: Permit.
DES-3528:admin#
Command: show authentication
Authentication Server Failover: Local.
DES-3528:admin#
show authentication mac_format
Purpose This command is used to display the authentication MAC format setting.
Syntax show authentication mac_format
Description
This command is used to display the authentication MAC format setting.
Parameters None.
Restrictions None.
Example usage:
To display the authentication MAC format setting:
config authentication server failover local
show authentication
show authentication
show authentication
518