D-Link xStack DES-3528 Series Cli Reference Manual page 260

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
radiusAccClientServerPortNumber
radiusAccClientRoundTripTime
radiusAccClientRequests
radiusAccClientRetransmissions
radiusAccClientResponses
radiusAccClientMalformedResponses
radiusAccClientBadAuthenticators
radiusAccClientPendingRequests
radiusAccClientTimeouts
radiusAccClientUnknownTypes
radiusAccClientPacketsDropped
CTRL+C ESC q Quit
config accounting service
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the accounting service:
DES-3528:admin# config accounting service shell state enable
Command: config accounting service shell state enable
Success.
DES-3528:admin#
show accounting service
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show accounting service:
DES-3528:admin# show accounting service
Command: show accounting service
SPACE n Next Page
Used to configure the state of the specified RADIUS accounting service.
config accounting service [network | shell | system] state [enable | disable]
This command is used to enable or disable the specified RADIUS accounting service.
network − Accounting service for 802.1X port access control.
By default, the service is disabled.
shell − Accounting service for shell events:
When user login or logout the Switch (via the console, Telnet, or SSH) and when timeout
occurs, accounting information will be collected and sent to RADIUS server.
By default, the service is disabled.
system − Accounting service for system events: reset, reboot.
By default, the service is disabled.
enable − Enable the specified accounting service.
disable − Disable the specified accounting service.
Only Administrator and Operator-level users can issue this command.
Used to show the RADIUS accounting services' status.
show accounting service
This command is used to show the state for radius accounting service.
None
None.
0
0
0
0
0
0
0
0
0
0
0
p Previous Page r
260
Refresh