D-Link xStack DES-3528 Series Cli Reference Manual page 297

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
DES-3528:admin#show loopdetect
Command: show loopdetect
LBD Global Settings
---------------------------
Status
Mode
Interval
Recover Time
Trap State
Log State
Function Version : 4.04
DES-3528:admin#
show loopdetect ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show loop-detect ports:
DES-3528:admin# show loopdetect ports 1-3
Command: show loopdetect ports 1-3
Port LoopDetect State
------ ------------------ ----------
1 Enabled
2 Enabled
3 Enabled
CTRL+C ESC q Quit
config loopdetect log state
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the log state for LBD:
DES-3528:admin#config loopdetect log state enable
Command: config loopdetect log state enable
Success.
: Disabled
: Port-based
: 10 sec
: 60 sec
: None
: Enabled
Used to display the current per-port loop-back detection settings on the Switch.
show loopdetect ports {<portlist>}
This command is used to display the current per-port loop-back detection settings on the
Switch
<portlist> − Specifies a range of ports for the loop-back detection
None.
Loop Status
Normal
Normal
Normal
SPACE n Next Page
This command is used to configure the log state for LBD.
config loopdetect log state [enable | disable]
This command is used to configure the log state for LBD. The default value is enabled.
enable - Enable the LBD log feature.
disable - Disable the LBD log feature. All LBD-related logs will not be recorded.
Only Administrator and Operator and Power-User-level users can issue this command
p Previous Page r
297
Refresh