Hard disk drives / solid state drives
7.2.6.3
Installing the new 2.5-inch HDD SAS / SATA backplane
Figure 51: Installing the SAS / SATA backplane
Ê At a slight angle, fit the SAS / SATA backplane into the two guides on the
drive cage (1).
Ê Fold in the SAS / SATA backplane (2).
Ê Secure the SAS / SATA backplane with the two screws (see figure 49).
Ê Connect all cables to the SAS / SATA backplane (see figure 49).
I
For a complete cabling overview, please refer to section
on page
301.
7.2.6.4
Concluding steps
"Reassembling" on page 58
Ê
Ê Reinstall all HDD / SSD modules to their original drive bays as described in
section
"Installing 2.5-inch HDD / SSD modules" on page
"Connecting the server to the mains" on page 67
Ê
"Switching on the server" on page 68
Ê
"Enabling BitLocker functionality" on page 90
Ê
132
Upgrade and Maintenance Manual
"Cabling plans"
124.
TX140 S2