Removing A Riser Module; Installing A Riser Module - Fujitsu PRIMERGY RX4770 M6 Upgrade And Maintenance Manual

4.10.2

Removing a riser module

Figure 20: Removing a riser module (example: riser module for PCIe slot 1 and slot 2)
▶ If necessary, disconnect the cables from the other components.
▶ Carefully pull out the corresponding riser module upward by holding it at the
four touch points (see circles).
4.10.3

Installing a riser module

Figure 21: Installing a rise rmodule (example riser module for PCIe slot 1 and slot 2)
RX4770 M6 Upgrade and Maintenance Manual
Basic hardware procedures
63