Using the [PROGRAM/VALUE] dial
You can use the [PROGRAM/VALUE] dial to select programs.
Turn the dial toward the right to step through the programs in ascending
order, or toward the left in descending order.
Selecting programs by category
Each program can be assigned to a category. You can select programs by from within a category. This is con-
venient when you want to find a program with the same type of sound.
1
Use the cursor [π/√] button to move the cursor to the
category indication in the display.
2
Use the [PROGRAM/VALUE] dial to select the
desired category.
The factory-set categories are listed below.
1: Bass
2: Lead
3: Synth Hard
4: Synth Soft
5: Motion
6: Strings/Pad
7: Keyboard
8: Guitar/Pluck
3
Use the cursor [π/√] button to move the cursor to the
word "Category."
4
Use the [PROGRAM/VALUE] dial to select a program.
You'll be able to select only programs that are assigned
to that category. With the factory settings, sound pro-
grams of same variety are assigned to each category.
For details on how to assign a category to a program,
refer to p.36 "Assigning a category."
Playing the RADIAS from the 16KEYS [1]–[16] keys
You can use the 16KEYS [1]–[16] as a keyboard, to play the RADIAS from the front panel.
If the dedicated keyboard is connected, you can't use the 16KEYS [1]–[16] keys to
play the sounds.
1
Use the 16KEYS [SELECT] button to choose KEYBOARD (the KEYBOARD
LED will light).
9: Bell/Decay
10: Acoustic
11: S.E/Hit/Drum
12: Arp/Seq
13: Split
14: Audio In
15: Vocoder
16: User
Playing programs – Program Play mode
21
Need help?
Do you have a question about the MMT RADIAS and is the answer not in the manual?