Program Mode - Korg M1 Owner's Manual

Program mode

In this mode you can play and edit programs.
You can select programs from 21 preset cards and from new
programs (KLC PRESET card). You can also edit or create
your own programs, and store them in the four cards (each
accommodating 50 programs, for a total of 200) provided by
the M1 software synthesizer.
Each program uses one of three oscillator modes.
Single
These programs use one oscillator. The oscillator consists of
OSC, VDF, VDA, and Insert FX sections.
OSC 1
Multisound
VDF VDA
The multisounds used by the oscillator can be selected from
16 preset cards.
Double
These programs use two oscillators. Each oscillator consists
of OSC, VDF, and VDA sections, and the combined output
of the oscillators is routed to the insert effects.
Insert FX
Insert FX 1
Insert FX 2
OSC 1
Multisound
VDF VDA
OSC 2
Multisound
VDF VDA
Program mode
Insert FX
Insert FX 1
Insert FX 2
3