Resource Pool - HP ProCurve 7000dl Series Basic Management And Configuration Manual

Using the Web Browser Interface for Basic Configuration Tasks
Configuring Demand Routing for a Primary or Backup Connection
14-100
Figure 14-73. IP Settings for the Demand Interface
20. If you selected Static for Address Type, enter the address and subnet mask
in the IP Address and Subnet Mask, respectively.
21. Click Apply to save the settings for the demand interface. You are returned
to the first demand routing screen.
Assigning an ISDN Group or BRI Interface to the

Resource Pool

You must now assign an ISDN group or BRI interface to the resource pool that
you created earlier. (See "Configuring the Demand Interface" on page 14-95.)
If you are configuring demand routing for a primary ISDN module, you will
assign the ISDN group to the resource pool. If you are configuring demand
routing for a backup ISDN module, you will assign the BRI interface to the
resource group.
Figure 14-74. Assign Dial Interfaces to a Resource Pool