HP ProCurve 7000dl Series Basic Management And Configuration Manual page 45

Overview
Interface Management Options
The VPN section includes a wizard that simplifies the process of configuring
an IPSec-compliant VPN. The VPN section eliminates the difficulty of remem-
bering the many commands necessary for configuring a VPN in the CLI. The
VPN section only appears in the Web browser interface if you have installed
an optional IPSec encryption module in the rear panel of your router.
You can perform most of your file maintenance in the Utilities section. Click
Configure to complete tasks such as saving, downloading, uploading, and
deleting files. You can also click Firmware to view information about your
router's current OS and upload any necessary upgrades. You can click Reboot
and restart the router, and you can also set up a Telnet session by clicking
Telnet to Unit.
N o t e
In the CLI, boot and configuration files are referred to as software. In the Web
browser interface, the boot and configuration files are called firmware.
For more information on how to configure your ProCurve Secure Router using
the Web browser interface, see Chapter 14: Using the Web Browser Interface
for Basic Configuration Tasks.
1-13