Default Isdn Template - HP ProCurve 7000dl Series Basic Management And Configuration Manual

Configuring Demand Routing for Primary ISDN Modules
Using Demand Routing for ISDN Connections
8-60
When the called party information element (IE) is created for this call, the
router removes the prefix and places the N$ digits in the Number Digits field.
National. For national calls, the dialing prefix is removed. For example, a
call from one U.S. LATA to another uses the format 1-NXX-NXX-XXXX. The
U.S. prefix is 1, and NXX-NXX-XXXX represents the 10-digit number necessary
for routing the call. When the router creates the called party IE for this call, it
removes the prefix and places the NXX-NXX-XXXX digits in the Number Digits
field.
Network-Specific. If you specify the network-specific call type, the ProCurve
Secure Router removes the prefix for the call when it prepares the called party
IE. For example, if the router is making a call to 700-N$, the dialing prefix is 700
and N$ represents the digits necessary for routing the call at the destination.
The ProCurve Secure Router removes the prefix and places the N$ in the
Number Digits field.
Subscriber. The ProCurve Secure Router also removes the prefix if you
specify the subscriber call. For example, if the router is making a call to 916-
555-1212, it would remove the 916 prefix and place 555-1212 in the Number
Digits field. For areas with mandatory 10-digit dialing, you should enter a blank
prefix to ensure that all ten digits are passed to the Number Digits field.

Default ISDN Template

By default, there is one isdn-number-template entry:
isdn-number-template 0 prefix "" subscriber 911
This entry allows you to make emergency calls within the United States.