Configuring Udp Relay - HP ProCurve 7000dl Series Basic Management And Configuration Manual

Procurve 7000dl series secure router
Hide thumbs Also See for ProCurve 7000dl Series:
Table of Contents

Advertisement

Using the Web Browser Interface for Basic Configuration Tasks

Configuring UDP Relay

14-132
To configure the interface to receive a dynamic address, follow these steps:
1.
In the navigation bar, select IP Interfaces under Router/Bridge.
2.
In the IP Interfaces window that is displayed, select the interface that you
want to take the dynamic address. The Configuration window for that
interface is displayed.
3.
Scroll to the IP Settings section. Select DHCP from the Address Type pull-
down menu.
4.
Click Apply.
Configuring UDP Relay
You can configure the ProCurve Secure Router to forward packets destined
to certain UDP ports to a helper address. For example, your LAN may include
a DHCP server in only one of its VLANs. If your router will be routing between
the VLANs, it might receive DHCP discover requests from some clients. You
could configure the router to forward these requests to your network's DHCP
server.
Follow these steps to configure UDP relay:
1.
Select UDP Relay from the navigation bar.
2.
Move to the IP Helper Address window.
3.
Enter the IP address of the server to which the router should forward
packets in the IP Helper Address fields.
4.
From the Interface pull-down menu, select the interface on which the
router will receive the packets that need to be forwarded.
5.
Click Add.
6.
If necessary, configure the helper address for a different interface. Repeat
steps 3 through 5.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 7102dlProcurve 7103dlJ8752aJ8753a

Table of Contents