Troubleshooting The Radius Server - HP ProCurve 7000dl Series Basic Management And Configuration Manual

Controlling Management Access to the ProCurve Secure Router
Troubleshooting AAA
No named list for
Telnet line 0;
default aaa
configuration used
Not a valid
username and
password
2-40
AAA: New Session on portal 'TELNET 0 (192.168.1.60:4867)'.
AAA: No list mapped to 'TELNET 0'. Using 'default'.
AAA: Attempting authentication (username/password).
AAA: Authentication failed.
AAA: Closing Session on portal 'TELNET 0 (192.168.1.60:4867)'.
Figure 2-4. debug aaa
To end the debug messages, enter:
Syntax: no debug aaa

Troubleshooting the RADIUS Server

To view information about RADIUS servers, enter the following command
from the enable mode context:
ProCurve# show radius statistics
This command displays information such as:
number of packets sent
number of invalid responses
number of timeouts
average packet delay
maximum packet delay
Statistics are shown for both authentication and accounting packets. (See
Figure 2-5.)
Default
setting for
Telnet is
Telnet
password