Configuring The Rsvp Hello Extension; Configuring Rsvp-Te Resource Reservation Confirmation - HP 10500 SERIES Configuration Manual

Step
3. Enable the reliability mechanism
of RSVP-TE.
4. Enable retransmission.
5. Enable summary refresh.

Configuring the RSVP hello extension

RSVP hello extension tests the reachability of RSVP neighboring nodes. It is defined in RFC 3209.
To configure the RSVP hello extension:
Step
1. Enter system view.
2. Enter MPLS view.
3. Enable global RSVP hello
extension.
4. Configure the maximum
number of consecutive hellos
that must be lost before the
link is considered failed..
5. Configure the hello interval.
6. Exit to system view.
7. Enter interface view of MPLS
TE link.
8. Enable interface RSVP hello
extension.

Configuring RSVP-TE resource reservation confirmation

Reservation confirmation is initiated by the receiver, which sends the Resv message with an object
requesting reservation confirmation.
Receiving the ResvConf message does not mean resource reservation is established. It only indicates that
resources are reserved on the farthest upstream node where the Resv message arrived and the resources
can be preempted.
To configure RSVP-TE resource reservation confirmation:
Step
1. Enter system view.
2. Enter MPLS view.
Command
mpls rsvp-te reliability
mpls rsvp-te timer retransmission
{ increment-value [ increment-value ] |
retransmit-value [ retrans-timer-value ] } *
mpls rsvp-te srefresh
Command
system-view
mpls
mpls rsvp-te hello
mpls rsvp-te hello-lost times
mpls rsvp-te timer hello timevalue
quit
interface interface-type
interface-number
mpls rsvp-te hello
Command
system-view
mpls
109
Remarks
Optional.
Disabled by default.
Optional.
Disabled by default.
Optional.
Disabled by default.
Remarks
N/A
N/A
Disabled by default.
Optional.
By default, the link is considered
failed if three consecutive hellos
are lost.
Optional.
The default is 3 seconds.
N/A
N/A
Disabled by default.
Remarks
N/A
N/A