HP ProCurve 7000dl Series Basic Management And Configuration Manual page 692

Using the Web Browser Interface for Basic Configuration Tasks
Managing Files, Firmware, Boot Software, and the AutoSynch™ Function
14-14
3. To set the backup firmware, use the pull-down menu for the Backup
Firmware box to select the file you want for your backup software. This
file should be SROS.BIZ.
This window also shows the current memory statistics for the internal flash
and cflash drives. The Flash memory statistics are displayed as the bytes used,
the total memory, and the drive space free. The CFlash memory statistics are
displayed below the Flash statistics in the same format.
It is always a good idea to keep track of the amount of memory you have
available when saving multiple configurations to your router. For information
about deleting files, see "Delete Config File" on page 14-12.
Upload Firmware. This section allows you to upload boot code and OS
updates to your router. To get these updates, go to www.procurve.com and
download the new firmware files to your PC.
Figure 14-9. Upload Firmware
1. To upload the file from your PC or terminal to the router, click the Browse
button next to the Select Firmware File: box.