View Snmp Statistics; Ip Settings - HP ProCurve 7000dl Series Basic Management And Configuration Manual

4. In the SNMP Version field, specify the SNMP version for the trap.
5. Click Add to save your changes and create the SNMP trap (which will now
be listed on the screen).
6. In the interface list, check the boxes for interfaces that are authorized to
send SNMP traps, and then click Apply.

View SNMP Statistics

Click the Statistics tab to view SNMP statistics through the Web browser
interface.

IP Settings

The IP Settings section allows you to configure the IP address and dynamic
Domain Name System (DNS) settings for the Ethernet interface.
Figure 14-34. IP Settings Section
7. Use the pull-down menu to configure the Address Type:
• None—Select this setting if you intend to set up a bridge group with
the Ethernet interface.
• Static—Select this setting if you want to configure a static IP address.
The boxes to enter the IP address and subnet mask are displayed, so
that you can enter the appropriate address for the Ethernet interface.
• DHCP—Select this setting to configure the interface as a Dynamic
Host Configuration Protocol (DHCP) client.
Using the Web Browser Interface for Basic Configuration Tasks
Configuring Ethernet Interfaces
14-47