Configure An Atm Interface; Configure The Atm Subinterface - HP ProCurve 7000dl Series Basic Management And Configuration Manual

Using the Web Browser Interface for Basic Configuration Tasks
Configuring ADSL Interfaces
14-80

Configure an ATM Interface

Figure 14-57. Configuration for ATM Interface Window
12. Enter a description if you want to document information about the ATM
interface.
13. Click the Enabled box to activate the ATM interface.
14. Click Apply to save your changes to the startup-config.

Configure the ATM Subinterface

15. In the Configured Permanent Virtual Circuits section, click the Add
button to begin configuring the permanent virtual circuit (PVC). The
Configuration for "atm <subinterface>" window is displayed.