HP ProCurve 7000dl Series Basic Management And Configuration Manual page 811

Figure 14-96. Configuring the Helper Address for UDP Relay
7. Move to the UDP Forward Protocol window.
8. Select the protocol for the packets that you want the router to forward
from the UDP Protocol pull-down menu. For example, you could select
bootps (67) to configure the router to forward DHCP requests.
9. Click Add.
10. You can specify multiple protocols by repeating steps 8 and 9.
Figure 14-97. Configuring the Helper Address for UDP Relay
Using the Web Browser Interface for Basic Configuration Tasks
Configuring UDP Relay
14-133