Configuring Authentication Using A Tacacs+ Server - HP ProCurve 7000dl Series Basic Management And Configuration Manual
Procurve 7000dl series secure router
Hide thumbs
Also See for ProCurve 7000dl Series:
- Quickspecs (18 pages) ,
- Basic management and configuration manual (817 pages)
Table of Contents
Advertisement
Using the Web Browser Interface for Basic Configuration Tasks
Configuring Passwords to Control Management Access to the Router
14-38
5.
Select the tab for the type of access you want to configure:
•
Enable Password
•
Telnet
•
Console
•
SSH
•
HTTP
•
FTP
6.
Select the Use remote RADIUS server option.
7.
Click Apply to save your settings.
Configuring Authentication Using a TACACS+ Server
If you want to use a TACACS+ server to authenticate users who access the
router, you must enable the AAA subsystem.
1.
Select Passwords in the navigation bar and scroll to the bottom of the
Add/Modify/Delete Users window.
2.
In the Service Authentication section, select AAA Mode Enabled.
3.
Click Apply to enable the AAA subsystem.
4.
Configure the settings for a TACACS+ server.
a.
Select the TACACS+ tab.
- Quick Links:
- Procurve Secure Router
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
