Troubleshooting; Compact Flash; Autosynch™ Error Messages - HP ProCurve 7000dl Series Basic Management And Configuration Manual

Overview

Troubleshooting

Troubleshooting

Compact Flash

Compact flash performance can vary greatly between vendors. If there seems
to be a delay when the ProCurve Secure Router saves changes to the compact
flash card, the Secure Router OS is still functioning, though at times it may
seem to be in a suspended state.
If your router does not have a dedicated compact flash card, you will need to
copy needed files to the router's internal flash memory if you want to continue
to use these files and configurations. To save a compact flash file to the router's
internal flash, access the enable mode context and enter:
Syntax: copy <source> <filename> <destination> <filename>
For example:
ProCurve# copy cflash SROS.BIZ flash SROS.BIZ
If you use the show tech command and intend to transport the file on your
compact flash card, you will need to save the file to the compact flash card.
From the enable mode context, enter:
ProCurve# copy flash showtech.txt cflash showtech.txt
AutoSynch™ Error Messages
If the router is displaying AutoSynch error messages or messages that your
files are not synchronized, you may need to do some file management tasks
to get it up and running.
The autosynch command synchronizes files from compact flash to flash. It
is very important to ensure that you have the current and proper SROS.BIZ
and startup-config files on compact flash. Otherwise, once synchronization
begins, the version of SROS.BIZ or startup-config on compact flash will be
copied over the file on flash.
Table 1-10 is a short list of AutoSynch error messages.
1-71