ADSL WAN Connections
Viewing the Status and Configuration of Interfaces
7-42
Viewing the Status and Configuration
of Interfaces
You can view information about all of the interfaces that are used to create
the ADSL connection.
Viewing the Status of the ADSL Interface
To view the status of the ADSL interface, enter:
Syntax: show interfaces adsl <slot>/<port>
Replace <slot> with the slot where the ADSL interface is installed, and replace
<port> with 1.
Figure 7-16 shows the output from this command for a sample network if the
ADSL connection is up. The first line of the display reports the status of the
ADSL interface and the line protocol—the logical interface to which you have
bound the ADSL interface.