Ethernet Ports; Slots - HP ProCurve 7000dl Series Basic Management And Configuration Manual

Overview
Hardware Overview

Ethernet Ports

Because the two Ethernet ports are not modular, they are assigned a fixed slot
and port number. For interface notation purposes, these ports are labeled Eth
0/1 and Eth 0/2. (See Figure 1-5.)
Eth 0/1
Eth 0/2
Figure 1-5. Connecting to the Two Ethernet Ports
The Ethernet ports support a 10 Mbps or a 100 Mbps connection. Connect
these ports to your LAN using 10Base-T or 100Base-T cabling with an RJ-45
connector that meets the EIA/TIA-568-A and 568-B standards. For a 10 Mbps
connection, use a Category 3 cable or better. For a 100 Mbps connection, use
a Category 5 cable or better.

Slots

The ProCurve Secure Router models 7102dl and 7203dl are both equipped with
two narrow slots. (See Figure 1-6.)
Slot 1 Slot 2
Figure 1-6. Two Narrow Slots
1-15