Configuring A Password For Telnet Access - HP ProCurve 7000dl Series Basic Management And Configuration Manual

Configuring Passwords to Control Management Access to the Router
4. If you want to use a RADIUS or TACACS+ server to control enable mode
access, then you must enable the AAA subsystem. See "Using the AAA
Subsystem to Control Management Access" on page 14-35 for instructions
on configuring these options.
5. Click Apply.

Configuring a Password for Telnet Access

To configure a password for Telnet access, complete these steps:
1. Select Passwords in the navigation bar and scroll to the bottom of the
Add/Modify/Delete Users window.
2. Select the Telnet tab.
Using the Web Browser Interface for Basic Configuration Tasks
14-29