HP ProCurve 7000dl Series Basic Management And Configuration Manual page 561

ProCurveSR7102dl# show bridge 1
Bridge Group 1:
Total of 1024 station blocks, 1024 free
Code: P - permanent
Address
00:10:4B:A0:DF:8F
00:D0:59:24:43:B5
Host identified by MAC
address
Figure 10-4. Viewing a Bridge Table
You can also view specific portions of the bridge table. Use the commands
shown in Table 10-1.
If necessary, you can manually add a host to the bridge table with this global
configuration mode context command:
Syntax: mac address-table static <mac address> bridge <group number> <interface ID>
Identify the host by its MAC address and enter the number of the bridge group
and the forwarding interface.
Table 10-1. Viewing Portions of the Bridge Table
Display Hosts Connected Through
a specific bridge group
a specific Ethernet interface
a specific PPP interface
a specific Frame Relay subinterface
a specific HDLC interface
Bridging—Transmitting Non-IP Traffic or Merging Two Networks
Action Interface
forward fr 1.16
forward eth 0/1
Host can be reached
through this interface
Command Syntax
show bridge <group number>
show bridge ethernet <slot>/<port>
show bridge ppp <interface number>
show bridge frame-relay <subinterface
number>
show bridge hdlc <interface number>
Configuring Bridging
Age RX count TX count
2 41 10
0 8 0
Packets received from and
sent to the host
10-9