Types Of Line Errors - HP ProCurve 7000dl Series Basic Management And Configuration Manual

Table 4-4 lists the default settings for line error thresholds.
Table 4-4. Threshold Commands
Setting Description
BES Bursty Errored Seconds
CSS Controlled Slip Seconds
DM Degraded Minutes
ES Errored Seconds
LCV Line Code Violations
LES Line Errored Seconds
PCV Path Coding Violations
SEFS Severely Errored Framing Seconds
SES Severely Errored Seconds
UAS Unavailable Seconds
To set a line error threshold, enter the following command from the E1 or T1
interface configuration mode context:
Syntax: threshold [BES | CSS | DM | ES | LCV | LES | PCV | SEFS | SES | UAS] [15Min |
24Hr] <number of errors>
Use the 15Min option to set the thresholds for 15-minute intervals. Use the
24Hr option to set the threshold for 24-hour intervals. The time period for
these intervals is based on the past 15 minutes or 24 hours at any given
moment, not on set 15 minute or 24 hour blocks of time. By default, both 15
minute and 24 hour thresholds are set.

Types of Line Errors

The ProCurve Secure Router reports 10 types of line errors. Each line error
type has its own error triggers. Table 4-5 lists the line errors that the ProCurve
Secure Router reports and the triggers for each of these line errors.
Configuring E1 and T1 Interfaces
ProCurve Secure Router Modules
15-Minute 24-Hour Default
Default
10 100
1 4
1 4
65 648
13340 133400
65 648
72 691
2 17
10 100
10 10
4-23