Ip Setup; Management Ip Addresses - ZyXEL Communications MES3500-24S User Manual

Layer 2 management switch

Table of Contents

8.5 IP Setup

Use the IP Setup screen to configure the Switch IP address, default gateway device, the default domain

name server and the management VLAN ID. The default gateway specifies the IP address of the default

gateway (next hop) for outgoing traffic.

The Switch needs an IP address for it to be managed over the network. The factory default in-band IP

address is 192.168.1.1. The subnet mask specifies the network number portion of an IP address. The

factory default subnet mask is 255.255.255.0.

You can configure up to 64 IP addresses which are used to access and manage the Switch from the

ports belonging to the pre-defined VLAN(s).

Note: You must configure a VLAN first.

Figure 31 Basic Setting > IP Setup

Chapter 8 Basic Setting

MES3500-24S/MGS3520 Series User's Guide