Radius Server Setup - ZyXEL Communications XGS4600 Series User Manual

26.3 RADIUS Server Setup

Use this screen to configure your RADIUS server settings. Click the RADIUS Server Setup link in the AAA
screen to view the screen as shown.
Figure 224 Advanced Application > AAA > RADIUS Server Setup
The following table describes the labels in this screen.
Table 114 Advanced Application > AAA > RADIUS Server Setup
LABEL
Authentication
Server
Mode
Timeout
Chapter 26 AAA
DESCRIPTION
Use this section to configure your RADIUS authentication settings.
This field is only valid if you configure multiple RADIUS servers.
Select index-priority and the Switch tries to authenticate with the first configured RADIUS server,
if the RADIUS server does not respond then the Switch tries to authenticate with the second
RADIUS server.
Select round-robin to alternate between the RADIUS servers that it sends authentication
requests to.
Specify the amount of time in seconds that the Switch waits for an authentication request
response from the RADIUS server.
If you are using index-priority for your authentication and you are using two RADIUS servers
then the timeout value is divided between the two RADIUS servers. For example, if you set the
timeout value to 30 seconds, then the Switch waits for a response from the first RADIUS server for
15 seconds and then tries the second RADIUS server.
XGS4600 Series User's Guide
285