Multicast Vlan Group Set Command; Multicast Vlan Group Delete Command; Multicast Vlan Group Show Command; Figure 201 Multicast Vlan Group Set Command Example - ZyXEL Communications IES-1248-71 User Manual

50.8.6 Multicast VLAN Group Set Command

Syntax:
ras> switch igmpsnoop mvlan group set <vid> <index> <start-mcast-ip> <end-
mcast-ip>
where
<vid>
<index>
<start-mcast-
ip>
<end-mcast-ip>
This command creates a multicast VLAN group. The following example creates a multicast
VLAN with VID 10 and group index 1. The multicast address range is 224.224.224.1 ~
224.224.224.10.

Figure 201 Multicast VLAN Group Set Command Example

ras> switch igmpsnoop mvlan group set 10 1 224.224.224.1
224.224.224.10

50.8.7 Multicast VLAN Group Delete Command

Syntax:
ras> switch igmpsnoop mvlan group delete <vid> <index>
where
<vid>
<index>
This command removes the specified multicast VLAN group setting.

50.8.8 Multicast VLAN Group Show Command

Syntax:
ras> switch igmpsnoop mvlan group show [<vid>]
where
<vid>
This command displays a multicast to VLAN translation entry.
IES-1248-71/73 User's Guide
The multicast VLAN ID [1 – 4094].
=
1..16; a unique number for this setting.
=
Start of the multicast IP address range.
=
End of the multicast IP address range.
=
The multicast VLAN ID [1 – 4094].
=
1..16; a unique number for this setting.
=
The multicast VLAN ID [1 – 4094].
=
Chapter 50 IGMP Commands
347