Msti Mapping - ZyXEL Communications RGS Series User Manual

5.3.45 MSTI Mapping

This page allows the user to inspect the current
change them as well.
Object
Configuration Identification
Configuration Name
Configuration Revision
MSTI Mapping
MSTI
VLANs Mapped
STP MSTI bridge instance priority configurations, and possibly
The name identifying the VLAN to MSTI mapping. Bridges must share the name and
revision (see below), as well as the VLAN-to-MSTI mapping configuration in order to
share spanning trees for MSTI's (Intra-region). The name is at most 32 characters.
The revision of the MSTI configuration named above. This must be an integer
between 0 and 65535.
The bridge instance. The CIST is not available for explicit mapping, as it will receive
the VLANs not explicitly mapped.
The list of VLANs mapped to the MSTI. The VLANs can be given as a single (xx, xx
being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be
separated with comma and/or space. A VLAN can only be mapped to one MSTI. An
unused MSTI should just be left empty. (I.e. not having any VLANs mapped to it.)
Example: 2,5,20-40.
Description
109