The Lag Port Edit Screen; The Lacp Port Screen - ZyXEL Communications GS1900-8 User Manual

22.2.5 The LAG Port Edit Screen

Use this screen to edit a LAG port. Click Configuration > Link Aggregation > LAG Port > Edit
to open this screen.
Figure 127 Configuration > Link Aggregation > LAG Port > Edit
The following table describes the labels in this screen.
Table 93 Configuration > Link Aggregation > LAG Port > Edit
LABEL
LAG Port Edit
LAG
State
Speed
Flow Control
Apply
Cancel

22.2.6 The LACP Port Screen

Use this screen to view LACP Port settings. Click Configuration > Link Aggregation > LACP Port
to open this screen.
Chapter 22 Configuration: Link Aggregation
DESCRIPTION
Displays the LAG index values.
Select the state to be Enable or Disable.
Displays the speed value as Auto, 10M, 100M, or 1000M.
Select Enable to use the flow control feature.
Click Apply to save the changes.
Click Cancel to discard the changes.
GS1900 Series User's Guide
134