Ipv6; Ipv6 Status; Ipv6 Interface Status - ZyXEL Communications XS1930-12F User Manual

Table 36 Basic Setting > Interface Setup (continued)
LABEL
Interface
Delete
Cancel

8.10 IPv6

Use this screen to view the IPv6 interface status and configure the Switch's management IPv6 addresses.

8.10.1 IPv6 Status

Click Basic Setting > IPv6 in the navigation panel to display the IPv6 status screen as shown next.
Figure 74 Basic Setting > IPv6
The following table describes the labels in this screen.
Table 37 Basic Setting > IPv6
LABEL
IPv6 Status
Domain Name
Server
Source
IPv6 Table
Index
Interface
Active

8.10.2 IPv6 Interface Status

Use this screen to view a specific IPv6 interface status and detailed information. Click an interface index
number in the Basic Setting > IPv6 screen. The following screen opens.
Chapter 8 Basic Setting
DESCRIPTION
This field displays the interface's descriptive name which is generated automatically by the
Switch. The name is from a combination of the interface type and ID number.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click Delete to remove the selected entry from the summary table.
Click Cancel to clear the check boxes.
DESCRIPTION
This field displays the IP address of the DNS server.
This field displays whether the DNS server address is configured manually (Static) or obtained
automatically using DHCPv6.
This field displays the index number of an IPv6 interface. Click on an index number to view more
interface details.
This is the name of the IPv6 interface you created.
This field displays whether the IPv6 interface is activated or not.
XS1930 Series User's Guide
104