Nokia ESB26 User Manual page 98

Gigabit ethernet switch
Table of Contents

Advertisement

10.
stop responding for several seconds (depending on the switch model).
Users with security level AuthNoPriv and AuthPriv are stored in NVRAM when the write
command is executed. The configured users will not be seen in the configuration file.
For a remote user, the ID of the remote SNMP engine must be specified.
Command Syntax
device-name(config)#snmp-server user USER-NAME group GROUP-NAME {v1 | v2c}
device-name(config)#snmp-server user USER-NAME group GROUP-NAME v3 [priv
ENCRYPTION] [auth {md5 | sha} PASSWORD] [remote ENGINE-ID]
device-name(config)#no snmp-server user USER-NAME [group GROUP-NAME {v1 |
v2c}]
device-name(config)#no snmp-server user USER-NAME group GROUP-NAME v3 [priv
ENCRYPTION] [auth {md5 | sha} PASSWORD] [remote ENGINE-ID]
Argument Description
USER-NAME
GROUP-NAME
v1, v2c, v3
priv ENCRYPTION
auth
md5
sha
PASSWORD
remote ENGINE-ID
Example 1
The following example shows how to create a user named TOM that uses SNMP v1:
device-name(config)#snmp-server user TOM group g_all_v1 v1
Example 2
The following example shows how to create a user named TOM that uses SNMP v3 with
authentication and privacy. The privacy password is privPass and the authentication password
is authPass:
device-name(config)# user TOM group g_all_v3 v3 priv privPass auth md5
authPass
MN700004 Rev 01
SNMP Server Configuration
The name of the user on the host that connects to the agent. The user name
is limited to 32 characters.
The name of the group to which the user is associated.
Enter the SNMP version number (v1, v2c, or v3). If you enter v3, you have
additional options.
(Optional) Specifies that the PDUs sent from this user should be encrypted,
with the key generated from the password.
(Optional) An authentication level setting session. Specifying this argument
requires either md5 or sha to be specified, as well as a password string.
HMAC-MD5 authentication
HMAC-SHA authentication
The authentication password string (not to exceed 32 characters).
(Optional) Creates a remote user by its engine-ID.
87

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents