Nokia ESB26 User Manual page 112

10.
Profile name: profile
OID: internet included
Profile name: profile
OID: risingAlarm excluded
device-name#
Displaying the SNMP v2c/v3 Notification Type
The show snmp-server notify command, in Privileged (Enable) mode, displays the
SNMPv2c and SNMPv3 notification parameters (name, type and tag). The notification type
can be either "trap" or "inform request" ("inform" for short).
Command Syntax
device-name#show snmp-server notify
Example
device-name#show snmp-server notify
Notify Name: fanStatusChangelinkDown
Notify type: inform
Tag: tag1
Notify Name: linkUp
Notify type: inform
Tag: tag1
Notify Name: resilientLinkStatusChange
Notify type: trap
Tag: tag
device-name#
Displaying the Notification Target Address
The show snmp-server target-addr command, in Privileged (Enable) mode, displays the
notification target address.
Command Syntax
device-name#show snmp-server target-addr
Example
device-name#show snmp-server target-addr
Target Address: YOU
IP address: 192.168.0.39
UDP port: 162
Target Parameter: param
Tag list: 1 tag1
device-name#
Displaying the Access List
The show snmp-server access-list command, in Privileged (Enable) mode, displays the
access list applied to the server.
MN700004 Rev 01
SNMP Server Configuration
101