Nokia ESB26 User Manual page 385

34.
Example
device-name#show dot1x hosts
=====================================================================
MAC Vlan Port
---------------------------------------------------------------------
00:40:95:31:80:6D 2
Debugging 802.1X
The table below lists the 802.1X debugging commands.
Table 34-7 802.1X Debugging Commands
C o m m a n d
debug dot1x
debug dot1x
authsm
debug dot1x basm
debug dot1x
packet
show debug dot1x
Enabling Debuggig
The debug dot1x command, in Privileged (Enable) mode, enables specific 802.1X
debugging. The no form of this command turns off the 802.1X debugging.
The dot1x debug commands will not be saved after reload.
By default, the debug is disabled.
Command Syntax
device-name#debug dot1x [all | core | radius | reauthsm]
device-name#no debug dot1x [all | core | radius | reauthsm]
Argument Description
all Debug the whole 802.1X process.
core Debug the 802.1X core process.
radius Debug RADIUS events.
reauthsm Debug re-authentication.
Authenticator State Machine Debugging
The debug dot1x authsm command, in Privileged (Enable) mode, enables the authenticator
state machine debugging. The no form of this command disables this debugging state.
MN700004 Rev 01
802.1X Port-Based Authentication
State
1/1/5 Authenticated
D e s c r i p t i o n
Enables specific 802.1X debugging.
Enables the authenticator state machine debugging.
Enables the backend state machine debugging.
Enables a specific packet debugging
Displays the status of the 802.1X debug actions that are currently activated
in the switch.
374
RadID Session time
1 00:59:02
ReAuth
00:00:01