Nokia ESB26 User Manual page 329

27.
Command Syntax
device-name(config)#monitor ports {enable | disable}
device-name(config)#no monitor ports
device-name(config)#monitor ports
device-name(config monitor ports)#
Argument Description
enable Enables monitoring of ports.
disable Disables monitoring of ports.
Monitoring the RAM (Memory) Usage
The monitor ram-usage command, in Global Configuration mode, enables or disables
monitoring of the RAM usage. The no form of this command disables monitoring of the
RAM usage.
The RAM usage monitor periodically checks the remaining amount of RAM that is available
for allocation. If this amount is less than a configured limit value, the monitor issues a log
alert.
By default, RAM usage monitoring is disabled.
Command Syntax
device-name(config)#monitor ram-usage {enable | disable}
device-name(config)#no monitor ram-usage
device-name(config)#monitor ram-usage
Argument Description
enable Enables monitoring of RAM usage.
disable Disables monitoring of RAM usage.
Monitoring the Traffic
The monitor session command, in Global Configuration mode, starts or ends a traffic
monitoring session. For a detailed description of this command, refer to the Traffic
Monitoring chapter.
Monitoring the Temperature
The monitor temperature command, in Global Configuration mode, is used to enable or
disable temperature monitoring and to set the temperature monitoring scale to Celsius or
Fahrenheit. The no form of this command disables temperature monitoring.
You can use the command without arguments to enter into Monitoring Configuration mode
for setting the temperature monitoring parameters.
By default, temperature monitoring is enabled and the monitoring scale is Celsius.
Command Syntax
device-name(config)#monitor temperature {enable|disable|celsius|fahrenheit}
device-name(config)#no monitor temperature
MN700004 Rev 01
Periodic Monitoring
318