Show Rmon Alarm - Nokia ESB26 User Manual

26.
17 Pkts1024to1518Octets
UU/SS/PP Interface unit/slot/port
1-4294967295 Polling interval, seconds
absolute Use absolute threshold values.
The trap will be sent only once when the rising threshold value is met.
delta Use threshold value differences.
The agent will send the trap whenever the delta between the last and the current
value reaches the rising or falling value.
In the case of delta you should define two events - one for the case when the
rising value is met and one for the case when the falling value is met.
rising-threshold Rising-threshold, in the range <0-4294967295>
falling-threshold Falling-threshold, in the range <0-4294967295>.
Insignificant if absolute is specified.
rising-index Rising-event index, in the range <0- 65535>
falling-index Falling-event index, in the range <0- 65535>
OWNER Alarm owner – character string without blank spaces.
Example
In the following example, the threshold type is absolute so the falling event is insignificant.
The index is given an arbitrary value of zero.
If the threshold type were delta, the index would be assigned the number of the event of the
falling value.
device-name(config)#rmon alarm 1 counter 2 1/1/3 5 absolute 20000 0 1 0 STN1
In this example the threshold type is absolute so the falling event is insignificant and that is
why the index is zero.
If the threshold type is delta the index should be the number of the event of the falling value;
To remove all defined RMON alarms:
device-name(config)#no rmon alarm
remove all defined rmon alarms ? [y/n] : y
To remove a specific RMON alarm:
device-name#show rmon alarm 1

show rmon alarm

The show rmon alarm command, in Privileged (Enable) mode, displays the specified RMON
alarm. If no argument is specified, all currently defined RMON alarms are displayed.
Command Syntax
device-name#show rmon alarm [<alarm-index>]
MN700004 Rev 01
Remote Monitoring
310