Nokia ESB26 User Manual page 391

35.
On-board Power PHY - Passed
On-board Power CPU - Passed
On-board Power OC
Temperature Test
Temperature
show self-test
The show self-test command, in Privileged (Enable) mode, issues a report on the current
built-in test status (obtained by the last BIST).
If full is specified, the command issues a full report, comprising the status (Passed/Failed) of
each test.
If full is not specified, the command issues a brief report, comprising:
• a notification stating whether problems were encountered;
•
items that failed (if any), with their (Failed) statuses.
Command Syntax
device-name#show self-test [full]
Examples
1. The following example displays a brief report about the current BIST status, when all
tests resulted with Passed statuses:
device-name#show self-test
No problem encountered by BIST
2. The following example displays a brief report about the current BIST status, when the
Crossbar Existence test resulted with Failed status:
device-name#show self-test
Problem encountered by BIST
---------------------------
CPU Interface Test
UART Existence
3. The following example displays a full report about the current BIST status:
device-name#show self-test full
Checking current BIST status...
device-name#self-test
Processing BIST by request...
CPU Core Test
CPU Validation
CPU Notify RAM Test
RAM Validation
CPU Interface Test
UART Existence
Testing Switch Core
Crossbar Existence - Passed
MN700004 Rev 01
Built-In Self Test (BIST)
- Passed
:
- Passed
:
- Passed
:
- Passed
:
- Passed
:
- Passed
:
380