Nokia ESB26 User Manual page 164

14.
Command Syntax
device-name(cfg protocol)#mstp max-age <seconds>
device-name(cfg protocol)#no mstp max-age
Argument Description
seconds Sets the RSTP maximum age time. The range is <6-40>.
Setting the Switch Maximum Hop Count
The mstp max-hops command, in Protocol Configuration mode, specifies the number of hops
in a region before the BPDU is discarded, and the information held for a port is aged. The no
form of this command resets the value to its default setting.
By default, the max hop count is set to 40.
Command Syntax
device-name(cfg protocol)#mstp max-hops <hops-count>
device-name(cfg protocol)#no mstp max-hops
Argument Description
hops-count The number of hops in a region. The range is <1- 40>.
Setting the MSTP Hold Counter
The mstp hold-count command, in Protocol Configuration mode, specifies the maximim
number of packets that can be sent for a hello time period. The no form of this command
resets the value to its default setting.
By default, the MSTP hold counter is set to 3.
Command Syntax
device-name(cfg protocol)#mstp hold-count <packets-count>
device-name(cfg protocol)#no mstp hold-count
Argument Description
packets-count The maximum number of allowed for a hello time period. The range is 3- 20.
Configuring MSTI Parameters
Table 14-5 lists the MSTI configuration commands.
MN700004 Rev 01
Multiple Spanning Tree Protocol (MSTP)
153