General Commands; View Mode And Privileged Mode - Nokia ESB26 User Manual

2.
Argument Description
destination-address
netmask
destination-prefix
A.B.C.D
distance
Example
device-name(config)#ip route 0.0.0.0/0 100.1.1.1
The default gateway IP address is 100.1.1.1 in network 100.1.0.0

General Commands

Table 2-3 shows the commands you can use at all times, regardless of the type of prompt
displayed.
Table 2-3 General Commands
exit Escape current mode and go to previous mode
help Display help information
no Negate a command or set its defaults
quit Escape current mode and go to previous mode

View Mode and Privileged Mode

Table 2-4 summarizes the Privileged mode commands. The enable command is available
only in View mode and is used to access Privileged mode. All other commands listed in the
table are available in Privileged mode. The show command and the terminal command are
available both in View and in Privileged mode.
MN700004 Rev 01
Getting Started
Route's IP destination address, in
netmask
to define a network address.
Destination network mask, in
destination-address.
Route's destination prefix, in
A.B.C.D
IP gateway address in
(Optional). Distance assigned for this route, in the range <1-255>.
14
A.B.C.D
format, used in conjunction with
A.B.C.D
format, used in conjunction with
A.B.C.D/M
format.
format.