Nokia ESB26 User Manual page 105

10.
Argument Description
WORD The name of the target parameter.
SEC-NAME The security name.
v1, v2c, v3 The security model of the target-parameter. It specifies the version of the protocol in
which the traps would be sent (v1, with TRAP-V1 PDU type or v2c and v3, with TRAP-
V2 PDU type).
noauth Security level, which implies no authentication and no encryption of the PDUs.
auth Authentication of the PDUs based on HMAC-MD5 or HMAC-SHA. No encryption.
priv Authentication based on HMAC-MD5 or HMAC-SHA and CBC-DES encryption for the
message data.
PROFILE (Optional) Profile name.
Example
device-name(config)#snmp-server target-param param1 ABC v3 auth
Defining the Notification Target Address
The snmp-server target-addr command, in Global Configuration mode, defines the
notification target address. The no form of this command, deletes the notification target
address.
Command Syntax
device-name(config)#snmp-server target-addr NAME A.B.C.D <udp-port> PAR-NAME
TAG1 [TAG2 ... TAGN]
device-name(config)#snmp-server target-addr NAME {addtag | deltag} TAG-NAME
device-name(config)#no snmp-server target-addr NAME
NOTE
The command with addtag and deltag arguments can be used only if the notification tag
address was defined.
Argument Description
NAME
A.B.C.D
udp-port
PAR-NAME
<TAG1> [<TAG2> ...
<TAGN>]
addtag
deltag
MN700004 Rev 01
SNMP Server Configuration
The name of the notification target address.
The IP address of the target.
The UDP port number of the target address in the range <1-65535>.
Parameter name.
A list of tags. You can add one or more tags.
Adds the specified tag to the list.
Removes the specified tag from the list.
94