Nokia ESB26 User Manual page 97

10.
Argument Description
NAME Configures a new SNMP group on the device. The name of the group is limited
to 32 characters.
v1 Version 1 of the SNMP protocol.
v2c Version 2 of the SNMP protocol.
v3 Version 3 of the SNMP protocol. Requires you to select an authentication level
(auth, noauth or priv).
auth Enables the Message Digest 5 (HMAC-MD5) or the Secure Hash Algorithm
(HMAC-SHA) packet authentication.
noauth Security level, which implies no authentication and no encryption of the PDUs.
This is the default if no keyword is specified.
priv Enables Data Encryption Standard (DES) packet encryption. Authentication is
based on HMAC-MD5 or HMAC-SHA and CBC-DES encryption.
read READ-VIEW A string (not to exceed 32 characters) that is the name of the view in which
you can only view the contents of the agent.
write WRITE-VIEW A string (not to exceed 32 characters) that is the name of the view in which
you enter data and configure the contents of the agent.
notify NOTIFY- A string (not to exceed 32 characters) that is the name of the view, which
VIEW specifies what portion of the MIB database is accessible for notifications.
Example 1
device-name(config)#snmp-server group GR1 v3 auth read v3_read write
v3_write notify v3_read
Example 2
The following example shows how to delete the group named MyGroup:
device-name(config)#no snmp-server group MyGroup
Example 3
The following example shows how to delete a group that is named MyGroup2, and has
security model v3 and security level AuthPriv. Note that if there are v1 and v2 groups named
MyGroup2, they will not be removed.
device-name(config)#no snmp-server group MyGroup2 v3 priv
Defining an SNMP User
The snmp-server user command, in Global Configuration mode, creates an SNMP local or
remote user and associates it to a group. If the security model is v3, enter the security level for
the user. The no form of the command removes the defined user and removes the user from
its associated group.
For SNMPv3 users, if no security level is specified, noAuthNoPriv security level is assumed.
If authentication is specified, select the hashing protocol to be used: HMAC authentication
MD5 (by selecting md5 in the command) or SHA (by selecting sha in the command), as well
as the key-generating password.
NOTE
The generation of the key is considerably slow. During the generation of the key the CLI will
MN700004 Rev 01
SNMP Server Configuration
86