A Radius Configuration Example - Nokia ESB26 User Manual

32. Remote Authentication Dial-In User Service (RADIUS)
Command Syntax
device-name(config)#aaa authentication login default PRIMARY SECONDARY
device-name(config)#no aaa authentication login default
Argument Description
PRIMARY
SECONDARY

A RADIUS Configuration Example

To demonstrate a RADIUS configuration, proceed as follows:
1. Install a RADIUS server on Server 1.
2. Configure the RADIUS server.
3. Edit RADIUS Server's Clients File and add the switch IP address with a distinctive key:
•
Add the line
10.2.200.200 123456
Edit the RADIUS Server's Users File:
•
Add two users as follows:
johnwilliams auth-type = local,
reply-message = "user is in"
jamessmith auth-type = reject
reply-message = "your payment balance is outstanding - access
denied"
Configure the Switch:
• In the switch CLI configure the RADIUS Server host and key as follows:
MN700004 Rev 01
Primary authentication method, either radius or local.
Secondary authentication method must be local.
Figure 32-2 RADIUS Configuration Example
password = "h5yr9b"
355