Nokia ESB26 User Manual page 212

17.
Argument Description
NAME VLAN name of an existing VLAN.
Example
device-name(config vlan)#delete accounting
This example deletes the VLAN named accounting.
delete id
The delete id command, in VLAN Configuration mode, deletes the VLAN specified by its
VLAN ID.
Command Syntax
device-name(config vlan)#delete id <vlan-id>
Argument Description
vlan-id Represents the ID number of an existing VLAN (2- 4094)
Example
device-name(config vlan)#delete id 10
This example deletes the VLAN with id 10
create range
The create range command, in VLAN Configuration mode, creates a sequence of VLANs in
the specified tag-number range, and automatically assigns VLAN names that match the tag-
numbers.
With the create range command you can also add specified port(s) as either tagged or
untagged ports.
The VLAN name that is automatically assigned is of the form Vlan_dddd, where dddd
represents a 1-to-4 digit number equal to the matching tag number. For example, the VLAN
created with tag-number 123 gets the name Vlan_123.
Command Syntax
(config vlan)#create range <
device-name
untagged]]
LIST
device-name(config vlan)#
tagged
[PORT-LIST ]]
Argument Description
vlan-id1 Beginning of range, <2-4094>. Must be less than vlan-id2.
vlan-id2 End of range, <2-4094>. Must be greater than vlan-id1.
PORT-LIST (Optional) One or more port numbers, specified by the following options:
UU/SS/PP – (unit, slot and port number), e.g. – 1/1/8 specifying a single port;
MN700004 Rev 01
Virtual LANs (VLANs)
> <
vlan-id1
create range
<vlan-id1> <vlan-id2> [PORTLIST
201
> [
vlan-id2 PORTLIST
tagged [
PORT-
untagged