Ip Igmp Snooping Vlan Mrouter; Ip Igmp Snooping Vlan Static - Nokia ESB26 User Manual

20.
Example
device-name(config)#ip igmp snooping vlan 200

ip igmp snooping vlan mrouter

The ip igmp snooping vlan mrouter command, in Global Configuration mode, adds a
multicast router port (adds a static connection to a multicast router) to a specific VLAN. To
remove the multicast router port definition on the specific VLAN, use the no form of this
command.
Command Syntax
device-name(config)#ip igmp snooping vlan <vlan-id> mrouter interface
<UU/SS/PP>
device-name(config)#no ip igmp snooping vlan <vlan-id> mrouter interface
<UU/SS/PP>
Argument Description
vlan-id the multicast router VLAN ID in the range <1-4094>
UU/SS/PP The interface to the multicast router.
Example
device-name(config)#ip igmp snooping vlan 200 mrouter interface 1/1/1

ip igmp snooping vlan static

The ip igmp snooping vlan static command, in Global Configuration mode, configures a
Host or physical interface statically to join a multicast group. The no form of this command
removes the static multicast definition.
Hosts or physical interfaces normally join multicast groups dynamically, but you can also
statically configure a host on an interface.
Command Syntax
device-name(config)#ip igmp snooping vlan <vlan-id> static HH:HH:HH:HH:HH:HH
interface PORT-LIST
device-name(config)#no ip igmp snooping vlan <vlan-id> static
HH:HH:HH:HH:HH:HH interface PORT-LIST
Argument Description
vlan-id
HH:HH:HH:HH:HH:HH
MN700004 Rev 01
IGMP Snooping
<1-4094> VLAN id value
6-byte hexadecimal address, should begin with 01:00:5e:
246