Nokia ESB26 User Manual page 108

10.
Argument Description
.LINE-TEXT
Example
device-name(config)#snmp-server system-name Nokia
Defining the System Location
The snmp-server location command, in Global Configuration mode, sets the MIB-II system
location string. The no form of this command removes the SNMP system location string.
The system location string is used for describing the physical location of this node (e.g.,
"telephone closet", "3rd floor"). If the location is unknown, the value is a zero-length string.
Command Syntax
device-name(config)#snmp-server location .LINE-TEXT
device-name(config)#no snmp-server location
Argument Description
.LINE-TEXT Descriptive system location string, up to 80 characters long.
Example
device-name(config)#snmp-server location ROOM 256
SNMP Displaying Commands
Table 10-7 lists the display commands for the SNMP Agent.
Table 10-7 SNMPv3 Agent Display Commands
C o m m a n d
show snmp-server
show snmp-server engineID
show snmp-server group
show snmp-server user
show snmp-server view
show snmp-server target-
param
show snmp-server target-
profiles
show snmp-server notify
MN700004 Rev 01
SNMP Server Configuration
System name, up to 80 characters long.
D e s c r i p t i o n
Displays the status of the SNMP server.
Displays the current SNMP agent engine ID and all remote
Engine IDs that are known to the agent.
Displays all configured groups for the SNMP agent.
Displays all users and the local SNMP engine of the agent to
which they are associated. Shows all the users defined for the
SNMP agent
Displays all configured views for the SNMP agent.
Displays the target parameters.
Displays the notification target profiles.
Displays information for the notify type (inform or trap).
97