Nokia ESB26 User Manual page 118

11.
dynamic
filtered
secure
static
multicast
NOTE
If any argument is omitted, the command clears all MAC addresses complying with the
arguments that are specified.
no mac-address-table
The no mac-address-table command, in Global Configuration mode, clears the MAC
addresses specified by the command arguments.
Command Syntax
device-name(config)#no mac-address-table
{dynamic|filtered|secure|multicast|aging-time} address HH:HH:HH:HH:HH:HH
[vlan <vlan-id>]
device-name(config)#no mac-address-table static address HH:HH:HH:HH:HH:HH
[vlan <vlan-id>] [interface UU/SS/PP]
Argument Description
address
HH:HH:HH:HH:HH:HH
interface UU/SS/PP
vlan <vlan-id>
dynamic
filtered
secure
static
multicast
aging-time
MN700004 Rev 01
Forwarding Database (FDB)
(Optional) Only dynamic MAC addresses are cleared.
(Optional) Only filtered MAC addresses are cleared.
(Optional) Only secure MAC addresses are cleared.
(Optional) Only static MAC addresses are cleared.
(Optional) Only multicast MAC addresses are cleaned.
The specified MAC address is cleared, if it complies with all other specified
arguments.
(Optional) MAC addresses on the specified interface are cleared, if they
comply with all other specified arguments.
(Optional) MAC addresses for the specified VLAN are cleared, if they comply
with all other specified arguments. The VLAN identifier is in the range <1-
4094>
Only dynamic MAC addresses are cleared.
Only filtered MAC addresses are cleared.
Only secure MAC addresses are cleared.
Only static MAC addresses are cleared.
Only multicast MAC addresses are cleared.
set default MAC address table aging-time
107